Vacuum negative pressure station

A vacuum negative pressure station (also known as a vacuum generating device, water circulation vacuum pump station, etc.) is a complete system that uses two water ring vacuum pumps as vacuum acquisition equipment and a vacuum tank as vacuum storage equipment. For situations where the vacuum source is frequently used and the required pumping volume is not too large, this system greatly saves energy compared to directly using a vacuum pump and effectively improves the service life of the vacuum pump.

1. Vacuum station equipment composition: It consists of a single or double vacuum pump as the main equipment for obtaining vacuum, a vacuum tank as the vacuum storage device, and an electrical control part connected to form a vacuum negative pressure station. Dual pump operation can enhance the system's security. For frequent use of vacuum sources with low required pumping volume, this vacuum station system saves energy and effectively extends the service life of the vacuum pump, improving the economic efficiency of the enterprise compared to directly using a vacuum pump as the vacuum source.

2. The upper and lower limits of the vacuum station can be set between 0 and -0.1Mpa through a vacuum gauge, with an error value of 10%.

3. Vacuum station gas storage tanks are manufactured according to user requirements, generally ranging from 0.1 to 3m3. After the vacuum station is started, the vacuum degree inside the vacuum tank remains between the set upper and lower limits.

4. The configuration of the vacuum pump adopts the water ring vacuum pump produced by Zibo Boshan Meizhuo Vacuum Pump Manufacturing Factory, and the corresponding model can be configured according to the gas consumption.

5、 Control method:

   a. Single pump automatic and manual control.

   b. Dual pumps with one on and one standby, or dual pumps separated and single pump timed automatic cycle operation control, or dual pumps simultaneously linked and operated automatic control.

6. Each pump in the vacuum negative pressure station is equipped with a set of inflatable electromagnetic check valves to prevent vacuum oil return faults.

7. Special industries can design metal or dust filters according to customer requirements to effectively protect vacuum acquisition equipment

Performance characteristics of vacuum negative pressure station:

After self starting, the entire operation process of the device can achieve fully automatic control. During its operation, the vacuum degree in various parts of the vacuum system always fluctuates up and down within its allowable range, and the fluctuation range can be adjusted according to user requirements. If the vacuum level falls below the set value, the alarm will sound a warning.

This device automatically controls the system without human operation and can automatically close the vacuum system during power outages.

The device is equipped with a gas water separator, which can save water sources and reduce environmental pollution.

The vacuum tank of this device can be designed as a horizontal or vertical structure according to the site, making installation more flexible.

This device adopts advanced automatic water replenishment equipment from Japan, which does not require manual water replenishment and greatly extends the service life of the equipment

Construction of Vacuum Negative Pressure Station

Regarding the frequent use of vacuum sources that require less pumping volume, this negative pressure station system wastes power compared to directly using vacuum pumps as vacuum sources, and effectively extends the service life of vacuum pumps, improving the economic efficiency of enterprises. The vacuum negative pressure station is composed of a single or double vacuum pump as the main equipment for vacuum acquisition, a vacuum tank as the vacuum storage device, and an electrical control part connected to form a vacuum negative pressure station. The dual pump task can enhance the system's guarantee,

Advantages of vacuum negative pressure station

The vacuum negative pressure station is equipped with a gas water separator, which can save water sources and reduce environmental pollution.

The vacuum tank of this device can be designed as a horizontal or vertical structure according to the site, making installation more flexible.

This device adopts advanced automatic water replenishment equipment from Japan, which does not require manual water replenishment and greatly extends the service life of the equipment.

This device automatically controls the system without human operation and can automatically close the vacuum system during power outages.

The purpose of vacuum negative pressure station

Vacuum pumps and compressors typically use suction to extract gases that are free of solid particles, insoluble in water, and non corrosive, in order to create a vacuum and pressure in a sealed container. By changing the structural materials. It can also be used to extract corrosive gases or use corrosive liquids as working fluids. It can be widely used in industries such as papermaking, chemical, petrochemical, light industry, pharmaceuticals, food, metallurgy, building materials, electrical appliances, coal washing, mineral processing, fertilizers, etc.